Tick Performance Adjustable Clutch Master Cylinder Kit for 2005-2013 Corvette C6, Z06, & ZR1

Revised January 2018 for easier install!

Is your clutch pedal sticking to the floor when you drive your car aggressively?  Are you having trouble shifting your car quickly in the upper RPMs?  Are 1st Gear and Reverse hard to engage while the car is sitting still?  You’re not alone!

Tens of Thousands of Corvette owners have cured issues like these (or avoided them altogether) with our Tick Performance Adjustable Clutch Master Cylinder Kits!

**NOTE: This kit will install in 2009-2013 Corvette & Z06, but a "Clutch Pedal Position Relearn" is required for the car's proper function. This can be performed with a TECH2 or similar Scan Tool at your local GM Dealership.  This procedure is not required for 2005-2008 Corvette & Z06.**

GM did not want to replace transmission and driveline parts under warranty, so they designed a very weak, anemic clutch master cylinder barely capable of moving enough fluid to fully disengage the stock clutch in perfect working order.  With years of wear (and/or an aftermarket clutch that requires more fluid to disengage), the inadequacy of the GM Master Cylinder becomes even more apparent.

Our Tick Performance Adjustable Clutch Master Cylinder Kits are built here in the USA around Tilton 7/8” Bore Cylinders (the same used in NASCAR every Sunday) and are made adjustable so that you can tailor the amount of fluid that your system needs in order to fully disengage ANY clutch, from stock to hardcore race-only clutches.  With our kit installed, you’ll notice:

• A slightly stiffer (we normally see ~15%), shorter pedal (in most cases) due to the increased cylinder bore
• A clutch pedal that is easier to modulate with a predictable, constant engagement point
• Effortless shifts at any RPM (especially high RPM), even when driving extremely aggressively
• Longer clutch & transmission life as a result of a properly-disengaging clutch
• Multiple other issues and annoyances fixed, including the infamous “crashed pedal”

Every Tick Performance Adjustable Clutch Master Cylinder Kit ships complete with everything needed to install, including our Unrestricted and Heat-Wrapped Stainless Braided Clutch Hydraulic Line (eliminating the need for the "drill mod"), all necessary hardware, and easy to understand instructions.  Installation generally takes 90-120 minutes (minor drilling required) and adjustments can be made at any time without any tools.

Tick Performance Adjustable Clutch Master Cylinder Kits are capable of more fluid flow than any competitor’s offering, and we stand behind them with a LIFETIME Warranty against leakage.  Rest assured that with our kit installed, you'll have the quickest shifting, most reliable kit available under your left foot!34